Inn Fashion - Barwick Manufacturing
 
Home Photo Gallery Product Specs Contact Us
 
style | design
 
Bedspread Specifications
 
Bedspread
 
Specifications:
  • Quilted bedspreads are not flame retardant because of the non-FR fill and the poly cotton backing.
  • Polyester fill is available in either 3.5 oz., 5 oz., 8 oz., 10 oz. or 12 oz.
  • Side and foot drop is typically 21".
  • Pillow tuck is typically 20".
  • Can be manufactured with or without a pillow tuck.
  • Coverlets are available.
 

Questions?
Call 1-800-209-0156 for assistance
Quilting Styles
 
 
Dust Skirt Specifications
 
Dust Skirts
Specifications:
  • All fabrics are either inherently flame resistant or treated with a flame resistant finish.
  • 3" band of face fabric extends onto top of box spring.
  • Platform fabric is a poly/cotton lining.

Questions?
Call 1-800-209-0156 for assistance
 
 
Pinch Pleated Drapery Specifications
 
Specifications:
  • All fabrics and linings are either inherently flame resistant or treated with a flame resistant finish. Flame certificates available upon request.
  • Can be manufactured lined or unlined; however lining is recommended. Note: Blackout lining cannot be laundered, dry clean only.
  • Fullness is typically 100%.
  • All selvage edges will be removed or clipped prior to manufacturing.
  • Multiple widths are joined with overlocked surged seams with safety stitch; using polyester corespun thread.
  • Headings consist of 4" wide buckram folded into the fabric before stitching.
  • Side hems will be 1-1/2" double turned folds.
  • Hems will be blind stitched using thread in a compatible color. Mono filament thread is not acceptable.
  • Bottom hems will be 4" double folded and will include a .25 oz. corner square lead weight.
  • Pleats will be three point pinch pleats spaced approximately 3" - 5" apart.
  • All joining seams will be concealed in the pleats.
  • Uses a steel pin system that is hooked into the drapery hardware.
Draw Systems
  • Cord Draw: Can be specified with tension pulley to hold down cord for safety issues.
  • Baton Draw: Baton can be hidden behind drapery if necessary.
  • Hand Draw: No baton or cord is used; drapery is drawn by hand.

Questions?
Call 1-800-209-0156 for assistance
Pinch Pleated Drapery
 
 
 
Board Valance Specifications
 
Board Valance
Specifications:
  • All fabrics and linings are either inherently flame resistant or treated with a flame resistant finish.
  • Can be manufactured lined or unlined; however lining is recommended.Note: Blackout lining cannot be laundered, dry clean only.
  • Fullness is typically 100-200%.
  • Outside mount is recommended.
Hardware Types
  • Mounting board is typically covered 3/4" pine board.
  • Angle irons required for installation.
    • Board attachment options:
      - Stapling: a permanent application
      - Velcro: used for easy cleanability and re-dressing.

Questions?
Call 1-800-209-0156 for assistance
 
 
Cornice Specifications
 
Cornice
Specifications:
  • All fabrics are either inherently flame resistant or treated with a flame resistant finish.
  • A cornice is a decorative top treatment constructed of 1/2" plywood on a 4 or 6 inch dust cap. Straight or shaped, it is padded with a layer of Polyester batting then covered with the face fabric.
  • Welting on the cornice is optional at an additional charge.
  • Welting can be made from face fabric or contrasting fabric.
Hardware Types
  • Angle irons required for wall mount.

Questions?
Call 1-800-209-0156 for assistance
 
We also produce the following: pillows, shams, bolsters, duvet covers, duvet inserts, blinds, drapery hardware and can provide complete installation of all products.

Call with any questions!
 
  satisfaction

1-800-209-0156

 NEWH

Barwick Manufacturing | 1647 North Ninth Street | Montevideo, MN 56265 | Map to Barwick

© 2006 Barwick Manufacturing